Stepwise erosion as a method for determining the mechanisms of wear in gas borne particulate erosionGEE, M. G; GEE, R. H; MCNAUGHT, I et al.Wear. 2003, Vol 255, Num 1, pp 44-54, issn 0043-1648, 11 p.Conference Paper

Friction and wear of pressureless sintered Ti(C, N)-WC ceramicsYUN, Shin-Sang; HAN, Byoung-Dong; PARK, Dong-Soo et al.Wear. 2003, Vol 255, Num 1, pp 682-685, issn 0043-1648, 4 p.Conference Paper

ON THE DEFORMATION OF WC-CO CEMENTED CARBIDESSARIN VK; JOHANNESON T.1975; METAL SCI.; G.B.; DA. 1975; VOL. 9; NO 10; PP. 472-476; BIBL. 11 REF.Article

Dynamic torsion testing of nanocrystalline coatings using high-speed photography and digital image correlationBARTHELAT, F; WU, Z; PROROK, B. C et al.Experimental mechanics. 2003, Vol 43, Num 3, pp 331-340, issn 0014-4851, 10 p.Article

Influence of starting powder on the microstructure of WC-Co hardmetals obtained by spark plasma sinteringHUANG, S. G; VANMEENSEL, K; LI, L et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2008, Vol 475, Num 1-2, pp 87-91, issn 0921-5093, 5 p.Conference Paper

Adhesion strength of multi-layered diamond films on WC-Co alloy substrateTAKEUCHI, Sadao; KOJIMA, Masaharu; TAKANO, Sigeto et al.Thin solid films. 2004, Vol 469-70, pp 190-193, issn 0040-6090, 4 p.Conference Paper

The influence of microstructure on the magnetic properties of WC/Co hardmetalsTOPIC, I; SOCKEL, H. G; WELLMANN, P et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2006, Vol 423, Num 1-2, pp 306-312, issn 0921-5093, 7 p.Article

Improvement in tribological properties of atmospheric plasma-sprayed WC―Co coating followed by Cu electrochemical impregnationJIANHUI YUAN; YINGCHUN ZHU; XUEBING ZHENG et al.Applied surface science. 2009, Vol 255, Num 18, pp 7959-7965, issn 0169-4332, 7 p.Article

Surface modification of tungsten carbide by electrical discharge coating (EDC) using a titanium powder suspensionJANMANEE, Pichai; MUTTAMARA, Apiwat.Applied surface science. 2012, Vol 258, Num 19, pp 7255-7265, issn 0169-4332, 11 p.Article

Performance and characterisation of CDV diamond coated, sintered diamond and WC-Co cutting tools for dental and micromachining applicationsSEIN, Htet; AHMED, Waqar; JACKSON, Mark et al.Thin solid films. 2004, Vol 447-48, pp 455-461, issn 0040-6090, 7 p.Conference Paper

Nanostructured Ni-WC-Co composite coatings fabricated by electrophoretic depositionWANG, Y; XU, Z.Surface & coatings technology. 2006, Vol 200, Num 12-13, pp 3896-3902, issn 0257-8972, 7 p.Article

Microstructural and tribological investigations of CrN coated, wet-stripped and recoated functional substrates used for cutting and forming toolsREBOLE, R; MARTINEZ, A; TATE, T. J et al.Thin solid films. 2004, Vol 469-70, pp 466-471, issn 0040-6090, 6 p.Conference Paper

Enhancing nucleation density and adhesion of polycrystalline diamond films deposited by HFCVD using surface treaments on Co cemented tungsten carbideSEIN, H; AHMED, W; JACKSON, M et al.Diamond and related materials. 2004, Vol 13, Num 4-8, pp 610-615, issn 0925-9635, 6 p.Conference Paper

Synthesis and processing of nanostructured WC-Co materialsBAN, Z.-G; SHAW, L. L.Journal of materials science. 2002, Vol 37, Num 16, pp 3397-3403, issn 0022-2461Article

On the thermal residual microstresses in WC-Co hard metalsGOLOVCHAN, V. T.International journal of refractory metals & hard materials. 2007, Vol 25, Num 4, pp 341-344, issn 0958-0611, 4 p.Article

The dependence of the contiguity of WC on Co content and its independence from WC grain size in WC-Co alloysLUYCKX, S; LOVE, A.International journal of refractory metals & hard materials. 2006, Vol 24, Num 1-2, pp 75-79, issn 0958-0611, 5 p.Article

Study on tribological behavior and cutting performance of CVD diamond and DLC films on Co-cemented tungsten carbide substratesDONGCAN ZHANG; BIN SHEN; FANGHONG SUN et al.Applied surface science. 2010, Vol 256, Num 8, pp 2479-2489, issn 0169-4332, 11 p.Article

A research on the grain growth of WC-Co cemented carbideLAN SUN; JIA, Cheng-Chang; MIN XIAN et al.International journal of refractory metals & hard materials. 2007, Vol 25, Num 2, pp 121-124, issn 0958-0611, 4 p.Article

Mesomechanical simulation of crack propagation through graded ductile zones in hardmetalsMINTCHEV, O; ROHDE, J; SCHMAUDER, S et al.Computational materials science. 1998, Vol 13, Num 1-3, pp 81-89, issn 0927-0256Conference Paper

Investigation of HDPE wear debris formed by friction against metal surfaces with different oxide film contentZAITSEV, A. L.Wear. 1997, Vol 210, Num 1-2, pp 96-103, issn 0043-1648Article

Desarrollo de moldes de prensado con recubrimientos antidesgaste = Pressing dyes development with wear resistant coatingsPOYATOS, A; TUR, F; PEREZ, J. A et al.Boletín de la Sociedad Española de Cerámica y Vidrio. 2005, Vol 44, Num 1, pp 33-37, issn 0366-3175, 5 p.Article

Acoustic emission study on WC-Co thermal sprayed coatingsMIGUEL, J. M; GUILEMANY, J. M; MELLOR, B. G et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2003, Vol 352, Num 1-2, pp 55-63, issn 0921-5093, 9 p.Article

Surface modification by scratching test for laser cleaning WC-Co in liquid polymerKANO, Seisuke.Nippon seramikkusu kyokai gakujutsu ronbunshi. 2006, Vol 114, Num 12, pp 1144-1149, issn 0914-5400, 6 p.Article

Synthesis of WC and dense WC-5 vol.% Co hard materials by high-frequency induction heated combustionKIM, Hwan-Cheol; OH, Dong-Young; GUOJIAN, Jiang et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2004, Vol 368, Num 1-2, pp 10-17, issn 0921-5093, 8 p.Article

The formation of a solid solution band at the surface of Ti(CN)-based cermetsPARK, Y. J; KIM, S. W; KANG, S et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2000, Vol 291, Num 1-2, pp 198-206, issn 0921-5093Article